For Parts Inquiries call (727) 344-9615
A Service Disabled Veteran Owned Small Business
© Copyright 2015 Integrated Publishing, Inc.

A-A-1808 Flatware, Silverplated And Stainless SteelThis commercial item description (CID) covers both silverplated and stainless steel flatware equal in quality to a grade known within the industry as "high-quality hotel and restaurant" flatware. The design of the flatware is commercially known as the "Kings" pattern, and shall be the manufacturer's current, standard commercial product, except for changes necessary to comply with this CID. The items covered by this CID are intended for use in officers' and executives' messes and dining rooms.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25


 

A-A-1808B

 

Process examination. Examination shall be made to establish that soldering, cementing, or argon in conformance to the specified requirements.

 

End item inspection. The sample unit for this inspection shall be one completely finished item of flatware. The inspection lot shall be all items of one type and configuration offered for delivery at one time.

 

Visual examination. Examination shall be made of the items for defects in table III. The inspection level shall be level II with an acceptable quality level (AQL) of 1.5 defects for hundred units for major defects and 4.0 total defects per hundred units.

 

TABLE III. Classification of defects

 

Examine

 

Defects

Classification

Major

Minor

Finish

Any component not finish as specified

X

 

Area of rust, pits or scale

X

 

Any component surface containing embedded foreign materials

X

 

Any component surface containing cracks, burrs or dents

X

 

Any component surface not clean or smooth

X

 

 

Construction and Workmanship

Any characteristic or detail of design or construction not in accordance with specified requirements

X

 

Component missing

X

 

Burrs, sharp corners or projections which may cause injury

X

 

Any component bent, misshapen, deformed, distorted or misaligned

X

 

Knife blade not uniformly ground and cutting edge not sharpened

X

 

Knife cutting edge broken in any place or containing nicks or burrs

X

 

Knife or fork blade loose in handle

X

 

Soldering or welding not smooth, fractured, cracked, or fused, or missing where required

X

 

 



For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business

© Copyright 2015 Integrated Publishing, Inc. Site Design & Marketing by Strategico.